Internal Skimmer 120
User manual
Parts
1
Air Flow adjusting valve
2
Air tube
3
Water Flow adjusting valve
4
Water pump
5
Min. Max. waterlevel indicator
6
Collection cup
7
Water flow adjusting tool
8
Holding brackets
9
Adjustable Hang-on bracket
10
Mounting screw
Parts
1
Air Flow adjusting valve
2
Air tube
3
Water Flow adjusting valve
4
Water pump
5
Min. Max. waterlevel indicator
6
Collection cup
7
Water flow adjusting tool
8
Holding brackets
9
Adjustable Hang-on bracket
10
Mounting screw
1
Air Flow adjusting valve
2
Water flow adjusting tool
3
Water Flow adjusting valve
4
Aquarium glass
1
Air Flow adjusting valve
2
Water flow adjusting tool
3
Water Flow adjusting valve
4
Aquarium glass
Installation
1
Make sure that the holding brackets (8) holding the front and rear cover are securly tightened
2
Make sure that the Hang-on bracket (9) is properly installed.
3
Make sure that the Air tubing (2) is properly connected to the pump
4
Place the skimmer in the tank using the Adjustable Hang-on bracket (9)make sure that the waterlevel is higher than the minimum waterlevel
5
First turn the Water Flow adjusting valve (3) to maximum using the Water flow adjusting tool (7)
6
Connect the power
7
Turn down the water level adjusting valve (3) the bubbles will move to the bottom of the collection cup (6)
8
Adjust the air intake by the Air Flow adjusting valve (1) Down (clockwise) Up (counterclockwise)
9
Adjust the air intake by the Air Flow adjusting valve (1) Down (clockwise) Up (counterclockwise)
Installation
1
Make sure that the holding brackets (8) holding the front and rear cover are securly tightened
2
Make sure that the Hang-on bracket (9) is properly installed.
3
Make sure that the Air tubing (2) is properly connected to the pump
4
Place the skimmer in the tank using the Adjustable Hang-on bracket (9)make sure that the waterlevel is higher than the minimum waterlevel
5
First turn the Water Flow adjusting valve (3) to maximum using the Water flow adjusting tool (7)
6
Connect the power
7
Turn down the water level adjusting valve (3) the bubbles will move to the bottom of the collection cup (6)
8
Adjust the air intake by the Air Flow adjusting valve (1) Down (clockwise) Up (counterclockwise)
9
Adjust the air intake by the Air Flow adjusting valve (1) Down (clockwise) Up (counterclockwise)
Maintenance
- Clean the skimmer at least once every 2 weeks.
- Replacing the filter sponge every 2 months is recomended