Internal Skimmer 200
User manual
Parts
1
Air Flow adjusting valve
2
Collection cup lid
3
Collection cup
4
Seal
5
Air hose
6
Water level adjusting knob
7
Bottom plate
8
Nylon botom plate screws 4x
9
Mounting screw
10
Air venturi
11
Pump
12
Holding bracket
13
Holding bracket mounting screw
14
Waste valve
15
Controller
Parts
1
Air Flow adjusting valve
2
Collection cup lid
3
Collection cup
4
Seal
5
Air hose
6
Water level adjusting knob
7
Bottom plate
8
Nylon botom plate screws 4x
9
Mounting screw
10
Air venturi
11
Pump
12
Holding bracket
13
Holding bracket mounting screw
14
Waste valve
15
Controller
Installation
1
Connect the air venturi (10) to the Air Flow adjusting valve (1) by using the supplied air hose (5).
2
Now connect the skimmer ballast to the power outlet.
3
Adjust the pump power by using the controller (16) and adjust the water level with the adjusting knob (6).
4
Be careful using the skimmer just after you have filled your tank with freshly mixed salt as this can cause extreme foaming and overflow.
5
The controller has to be in a dry place, the controller is not water proof (damage due to water damage is no warranty!)
Maintenance
1
To operate efficiently, the Blue Marine skimmer must be 24 hours a day in use
2
Check daily if your skimmer is functioning properly and produces the desired foam
3
Check daily if the collection cup is full and clean it completely when needed.
4
Check and clean pump regularly to ensure it does not become clogged, dirty pumps may break down, not maintained pumps are not covered by warranty.
5
For easy maintenance you can connect the waste hose with valve (15) to the collection cup for external collection into a bucket.