Reef Aquarium 160

Place the tank (1) on the bottom protector (14). Place aquarium on a smooth, horizontal surface with an adequate load-bearing capacity. Do not place the aquarium on electrical appliances or on furniture with surfaces which are liable to staining by water.

Please note. The total weights of the set up: aquarium completely with water and additives (depending on type of decoration) may be up to 240 kg.

Place the pump (4), sponge (18), filter media box (16), skimmer (2) and filter sock (17) in the appropriate sections of the back filter.

Read the manuals of the pump and skimmer before use.

Connect the pump hose (11) between the pump (4) and the nozzle coupling (9). Insert the coupling from the inside through the appropriate opening and then place the nozzle (10) over it.

Fill the tank and filter with seawater.

You need to adjust the water level in the back filter when the pump is running between the minimum and maximum line.

Place the brackets of the cover (12) on the edge of the aquarium and place the glass cover (13) on the brackets.

Place the lighting (5) on the edge of the aquarium and secure the lighting with the mounting screws

Place the cover (15) on the sump.

The Reef 160 is now ready for use.