Reef Aquarium 60-90

Place the tank (1) on the Bottom protector (16).
Place aquarium on a smooth, horizontal surface with an adequate load-bearing capacity.
Do not place the aquarium on electrical appliances or on furniture with surfaces which are liable to staining by water.

Please note. The total weights of the set up: aquaria completely with water and additives (depending on type of decoration) may be up to Reef 60 120 kg, Reef 90 150 kg.

Place the skimmer (2) in the middle section of the internal sump.

Before using the BM Internal Skimmer 120, read the skimmer manual.

Place the pump (3) (BM ReefPower 600) in the right section of the internal sump.

Insert the nozzle coupling (8) from the inside through the appropriate opening and then install the nozzle (9).

Place the lighting fixture (4) on the edge of the sump and hand tighten the mounting screws for the fixture (12) so that it can be moved even when the sump cover is placed.

Place the cover (17) on the sump. Adjust the position of the lighting fixture so it fits in the openings of the cover, then tighten the screws.

Slide the lighting (5) in the fixture (4).

Secure the lighting with the mounting screws (13) using the screwdriver (14).

Place the breackets of the cover (11) on the edge of the aquarium and place the glass cover (15) on the brackets.

The Reef 60/90 is now ready for use.