Smart-Air 1 and 2
User manual
Installation
1
The Smart-Air is easy to install on the side of your aquarium with the integrated suction cup.
2
Always position the air pump above the water level otherwise the pump can fill up with water as a result of the siphoning effect. No warranties for damages caused by the air pump getting wet or water fill inside the air pump!
3
Alternative you may use a non-return valve, then the air pump may be positioned underneath the water level.
Installation
1
The Smart-Air is easy to install on the side of your aquarium with the integrated suction cup.
2
Always position the air pump above the water level otherwise the pump can fill up with water as a result of the siphoning effect. No warranties for damages caused by the air pump getting wet or water fill inside the air pump!
3
Alternative you may use a non-return valve, then the air pump may be positioned underneath the water level.
Maintenance
1
The lifespan of the Smart-Air is about one year, depending on the wear of the membrane.
2
Diaphragm ware is normal and is not covered by warranty. Due to the design the membrane cannot be replaced.
3
Replace air tube and air stones yearly. Old and cracked ones will reduce performance and durability of the air pump.
Technical specifications
| Model | Air-flow | Pressure | Power |
|---|---|---|---|
| Smart-Air 1 | 320 ml/min | < 11 KPa | 1 W |
| Smart-Air 2 | 320 ml/min x2 | < 11 KPa | 1.8 W |