BactoPlus Filter Start Gel

BactoPlus Filter Start GEL contains a very high concentration of living nitrifying bacteria. Each millilitre contains over 8.000.000 of these bacteria. Nitrifying bacteria are responsible for optimum filter performance in biological filtration for ponds, their function will create a healthy environment for fish and plants. By using BactoPlus Filter Start GEL you can either establish a colony of bacteria in reduced time or maintain the colony in existing filters.

Directions for use: In case of filter start-up or raised ammonia and/or nitrite values: 50 ml per 1.000 litre of water. After cleaning the filter or after water changes: 25 ml per 1.000 litres of water. Maintenance: 25 ml per 1.000 litres of water each month. Temperature of the water should be at least 10°C, if temperature is below 10°C dosage should be doubled. The cap contains 15 ml. Apply the GEL to the filter material, the water circulation should be stopped while the filter is properly aerated for 12 hours. After 12 hours start water circulation but keep UV and ozone equipment switched off for at least 24 hours. Store frost free and out of reach of children. Best before: See print on the bottle.

For filter maintenance and removal of sludge and residues you can use BactoPlus BSO. Best results are achieved when combining BactoPlus Filter Start GEL and BactoPlus Activator GEL, this product activates bacteria in the pond environment and will help to create a healthy pond without unwanted algae.