Scaping Foam

Scaping Foam for indoor and outdoor use – Safe for plants and animals

Black PUR foam. Suitable for creating waterfalls and streams as well as backgrounds in aquariums and terrariums. Dries dark giving it a natural look. High adhesive power on almost all materials and substrates (both porous and non-porous): e.g. polyester, natural stone, concrete, wood, metals, many plastics, etc. Scaping foam is safe for plants and animals, when the foam has fully cured after spraying out.

Application: Please read the safety instructions before use! The surface must be dry, clean, grease- and dust free. Remove loose parts and pre-moisten surface. Shake the can at least 20 times vigorously and screw the straw on the upright can. Hold the can upside down and spray out the foam: fill joints up to 60%, for large joints spray several times. After ±15 minutes the foam is tack free, complete curing can take up to 24 hours depending on foam thickness. Process between 10 and 25°C. Slight discolouration is possible.
Shelf life: 18 months in unopened, upright packaging in a cool, frost-free, dry place (5-30°C); see imprint on bottom. After opening limited shelf life.
Properties: High filling capacity, CFC and HCFC-free (ozone-harmless), temperature resistant from -50 to +90°C, easy to cut, water-resistant, not suitable for PE, PP, PTFE and similar materials.

Danger. Contains alkanes, C14-17, chloro, 4,4’-methylenediphenyl diisocyanate, isomers and homologues. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May cause harm to breast-fed children. May cause damage to organs through prolonged or repeated exposure. May cause long lasting harmful effects to aquatic life. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Use only outdoors or in a well-ventilated area. Wear protective gloves, protective clothing, eye protection, face protection. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.
As from 24 August 2023 adequate training is required before industrial or professional use. Keep out of reach of children.