

Reef LED 55-74 - 72-91 - 93-112 - 112-131
Function
Reef LED are LED lighting designed for open and closed aquariums with a glass thickness up to 10 mm. Can be operated with the LED Controller (dimming + switching on/off) or a timer.
Installation on an open aquarium
Slide both supports to the correct width. Place the light above the aquarium with the brackets on the top of the glass.
Connect the electrical cord to the lighting adapter and put the plug in the socket.
Installation in a closed aquarium
Remove the two extendable supports from the LED lighting. Mount the two clips on either side under the lighting.
Place the lighting on the stabilisation strips of the aquarium and push the clips against the stabilisation strips to prevent the lighting from sliding.
Connect the electrical cord to the lighting adapter and put the plug in the socket.
Installation in a closed aquarium
Remove the two extendable supports from the LED lighting. Mount the two clips on either side under the lighting.
Place the lighting on the stabilisation strips of the aquarium and push the clips against the stabilisation strips to prevent the lighting from sliding.
Connect the electrical cord to the lighting adapter and put the plug in the socket.
Maintenance
Clean the lighting regularly with a damp cloth. This extends the longevity and improves the light output.
The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
Technical specifications
| Model | 55-74 cm | 72-91 cm | 93-112 cm | 112-131 cm |
|---|---|---|---|---|
| Min. aquarium size | 55 cm | 72 cm | 93 cm | 112 cm |
| Max. aquarium size | 74 cm | 91 cm | 112 cm | 131 cm |
| Length | 54.5 cm | 71 cm | 92.5 cm | 111.5 cm |
| Number of LEDs | 72 | 96 | 132 | 154 |
| Wattage | 44 watt | 56 watt | 75 watt | 86 watt |
| Voltage | 20 volt | 20 volt | 36 volt | 36 volt |


