Smart Heater 55W
User manual
The Smart Heater is a digital aquarium heater with an adjustable thermostat (18-34°C) and built-in thermometer. Tropical fish live in warm water, with this underwater heater you can heat the aquarium water to the desired constant temperature.
Installation
1
Attach the click switch with the holder to the wall.
2
Install the heater in the aquarium with the supplied clips and suction cups (see figure A).
3
Allow the thermostat of the heater to acclimate for about 5 minutes with the water temperature.
4
Turn on the heater by plugging it into the socket. Ensure that no water can get close to the socket.
5
Set the desired water temperature (between 18 and 34 °C) using the click switch.
Each click increases the temperature by 1 degree. Five seconds after you have set the desired temperature, the display will show the current water temperature and the heater will start heating the water.
!
Always check the water temperature with an aquarium thermometer. Even though the heater has a temperature accuracy of ± 1°C small deviations are always possible.
A
Installation
A
1
Attach the click switch with the holder to the wall.
2
Install the heater in the aquarium with the supplied clips and suction cups (see figure A).
3
Allow the thermostat of the heater to acclimate for about 5 minutes with the water temperature.
4
Turn on the heater by plugging it into the socket. Ensure that no water can get close to the socket.
5
Set the desired water temperature (between 18 and 34 °C) using the click switch.
Each click increases the temperature by 1 degree. Five seconds after you have set the desired temperature, the display will show the current water temperature and the heater will start heating the water.
!
Always check the water temperature with an aquarium thermometer. Even though the heater has a temperature accuracy of ± 1°C small deviations are always possible.
Maintenance
Clean the heater regularly using a sponge and a de-scaling agent. Dirt, lime deposits or algae can accumulate on the glass of the heater. After cleaning, rinse the heater thoroughly with clean tap water.